LATHES AND ACCESSORIES
|CLICK FOR LARGER PICTURES|
The only standard 8' between centers lathe! (15" swing) A rugged Lathe designed with production turning in mind. A wide range, two step variable speed drive system with 1 1/2hp provides ample torque and low speed for even the biggest jobs. A superb auto-locking guard is standard.
With 53" between centers (15" swing), this shorter version of the 1596 Lathe features 320-3400 rpms with continuously variable speed in the 2 speed ranges. A superior guarding system with auto-locking provides great operator Safety. The bed can be filled with concrete or sand for greater mass.
The Vega model1446 Lathe features a 14" swing and 46" turning capacity between centers. A two step, continuously variable speed pulley system provides 320-3400 rpm speed range driven by a 1 hp tefc motor. Spindle size is 1" - 8tpi. Optional outboard support allows turning to 23" with a very rigid support assembly.
|2400 BOWL LATHE
Able to handle very large and heavy work, the Vega 2400 Bowl Lathe's unique unobstructed access to the bowl end. A/C motor standard, D/C drive optional- Very heavy duty - weighs over 500#. 1 1/4 -8 tpi Spindle, #2 MT.
|PRO LATHE DUPLICATOR
Fitting most Lathes, this attachment is generally accepted as the finest duplicator available! Why? Fast set-up, rapid stock removal, rigid construction, fine detail ability micro adjustment, is equally suited for small or large turnings, 3', 4' and 8' models standard with great accessories available.
|MODEL 24 BOWL LATHE
Especially designed with the bowl turner in mind the Model 24 allows access from the end of the Lathe for turning diameters to 24". Low ranges provide safe speeds for turning large pieces. American made motor with reversing switch for reduced sanding time.
Cutting Formica and other thin materials on a Table Saw has always been difficult! This guide clamps quickly to the side of most fences and guides the material in a channel preventing the material from raising over the blade or sliding underneath the fence.
|SLENDER TURNING ATTACHMENT
Two (2) models available for different size stock. These attach to the Pro Duplicator to support turnings which tend to 'whip' when spinning. Model 1.375 is for stock up to 1 3/8" square, Model 1.875 is for stock up to 1 7/8" square.
|MINI LATHE DUPLICATOR
Fits 6" through 10" swing Lathes and has 11" of travel. Copies from template or master turning. Great for pen turning and much larger projects. Precise cutter control is achieved by lead screw drive and micro adjust feed mechanism.